Keysdaq series capacitor energy storage stud welding is a new generation product developed by our company, which can weld studs, internal thread studs, pins and other components on metal workpieces. During the welding process, the energy storage capacitor is discharged through the tip of the component, with a discharge time of 0.001 to 0.003 seconds. No gas or ceramic ring protection is required, and the melting depth is about 0.1mm. This method is suitable for thin plates with a thickness of over 0.4mm, with no welds on the surface and no defects such as indentation, discoloration, deformation on the back. It is most suitable for workpieces with strict surface requirements; The ratio of plate thickness to bolt diameter is 1:10.

 

Product features:

Optimized welding machine appearance: The welding machine wiring is smoother, more convenient, reliable, and less prone to loosening; Integrate multiple welding methods: manual contact type, manual gap type, and automatic simple platform type; The input power of the welding machine is increased to more than twice that of the ordinary stud welding machine, and the charging and discharging time can be ignored, greatly improving the welding frequency and efficiency; Adopting high-speed MCU: precise control of welding voltage, with a voltage adjustment accuracy of up to 1V; Real time monitoring of welding machine temperature: automatic alarm and stop welding when the machine overheats; Adopting an incoming filter: meeting the requirements of high voltage fluctuations and undergoing EMC and high-voltage withstand voltage tests; It has the function of preventing repeated welding and external RS232 and RS485 communication functions.

 

Application scope:

Processing and manufacturing of electrical cabinets, household appliances, sheet metal processing, signage, insulation nails, elevators, aluminum curtain walls, electrical complete sets, mechanical accessories, kitchen equipment, and metal workpieces.

 

weld range: M3-M12
stud length: 10-390mm
stud material: SS, LCS, AL, BRASS
weld speed: M3=33PCS STUD/MIN, M8=12PCS STUD/MIN, M10=9PCS STUD/MIN
capacity: 72000-180000uF (RSR 1600-4000 model)
weld time: 1-3msec.
charge voltage: 50v-220v
power supply: 220V 50/60Hz, 10AT
working power source: capacitor
cold: air cold